Overhead Door Leafs
Features
-
Custom extruded aluminum rails and styles
-
Thermally broken extrusions
-
Integral continuous hinges
-
Internal reinforcement for doors wider than 12
-
Optional internal mullions
-
Designed to accept insulating glazing up to 1 or solid panels
-
Double bulb seal weather stripping at hinge joints
-
Continuous weather-stripping along bottom rail
Close WindowSpecifications
-
2 thick door extrusions
-
Top and bottom rails 3 ⅝ x 2
-
End styles 3 ⅝ x 2
-
Double end styles to 7 Ό width for doors over 12ft wide
-
Internal mullions 2 ⅜ x 2
-
Glass secured with removable extruded aluminum glass stops, glazing vinyl on interior side, structural silicon on exterior side
-
Door weight approximately 4lbs per square foot
-
Leaf designed to meet or exceed industry standards (DASMA) for wind loading
Hardware Requirements
|
Galvanized steel hardware with helical torsion spring system |
|
|
Doors up to 400lbs |
2 inch commercial track system |
|
Doors greater than 400lbs |
3 inch commercial track system |
|
Hardware supplied by others |
|
Available Sizes
|
Width: |
from 4ft to 20ft from 1220mm to 6100mm |
|
Height: |
from 18ins to 36ins from 460mm to 915mm |
|
Custom sizes available in 1 inch increments |
|
Available Colours
-
Clear, bronze or black anodized
-
Custom colours by Duracron baked enamel or by powder coating.
Available Leaf Configurations
|
|
Top Rail Thermal Break Removable Extruded Aluminum Glass Stop Glazing Vinyl Silicon Seal 1 Insulated Glass
|
|
|
|
Hinge SectionGlazing Vinyl Silicon Seal Removable Extruded Aluminum Glass Stop Thermal Break Integral Hinge Receptacle for steel reinforcing T bar Bulb Seal Weather strip Thermal Break Glazing Vinyl Silicon Seal 1 Insulated Glass |
|
|
|
Bottom Rail1 Insulated Glass Glazing Vinyl Silicon Seal Removable Extruded Aluminum Glass Stop Thermal Break Bulb Seal Weather strip
|
