|
|
|
Window Design Technical Specifications Warranty Service Manual
Standard Features: - 5 year best in industry warranty backed by a one toll free call service network in - Guaranteed weatherproofing: double weatherstripping, interlocking jambs and sloped sills - ELT listed product - Minimum of 2 security locking features - Right to Left (OX) or Left to Right (XO) opening directions - Top hung moving panel construction - 1" insulated tempered glass unit - Clear or dark bronze anodized alumium - Fully assembled and ready to install - One standard size
Optional Features: - Custom sizes - Custom colors - Custom glass
Window Construction The window is constructed from proprietary designed robust anodized aluminum extrusions, high quality moving parts and tempered glass. All frames are fastened with screws, the joints are sealed and the glass is dry glazed creating a quality weatherproof product that will last for many years.
5 Year Best in Industry Warranty Easi-Serv windows are covered by the best warranty program in the industry:
Frame, mechanical components and glazing: The aluminum window frame, locks, rollers and glazing is covered by a 60 month warranty against manufacturing defects. **The glazing warranty does not cover scratches or breakage to glass incurred during or after installation of the window.
Electronics components: All electronics components such as circuit boards, sensors, motors and transformers are covered by a 12 month warranty against manufacturing defects.
Painted and powder coated finishes: These coatings are covered by the original manufacturers' performance warranties. These warranties are generally for 36 months. Easi-Serv uses Tiger Drylac polyester powder coatings or Duracron liquid coatings from PPG Industries Inc.
Weatherproofing Windows are guaranteed weatherproof. The sliding panel has double mohair weatherstrips on all sides; and the jambs interlock with the fixed panel and the side jamb. The sill is sloped toward the outside to ensure there is no water infiltration.
ETL Listed Product The Window has been certified by ITS ETL SEMKO. This certification mark indicates that the window has been tested and has met the requirements of a widely recognized U.S and Canadian product safety standard.
Opening Directions All windows in-line side sliders are made with one fixed panel (O) and one opening panel (X). The windows are available with either XO (right to left) or OX (left to right) operation when viewed from outside.
Opening Modes - CSP100-n Series: Fully Automatic Open/Close: Automatic windows are electro-mechanically driven with no-touch operation. Automatic opening is controlled by optical sensors and a three-position logic lock that provides for normal operation (automatic opening), peak period (locked open), and night usage (locked shut).
- CSP200-n Series: Manual Open / Manual Close: Manual windows are easy to operate and are carefully balanced to allow one-finger opening. The window features a large and easy to grab handle.
- CSP300-n Series: Manual Open / Self Close Self-closing windows open manually and close automatically when the handle is released. The window features a large and easy to grab handle.
Security Features All windows are fitted with a drop down security bar which prevents the sliding panel from moving when the window is locked.
- Manual and self-closing windows are fitted with Adams-Rite self closing thumb latches. - Automatic windows are locked using a mechanical plunger lock and can also be fitted with an optional security override that limits window opening to twelve inches. - The interlocking jambs and sill guide prevent forced entry using a pry bar.
Sliding Panel Construction The sliding panel is hung from its top edge using industry proven sealed roller bearings running on a high density guide track that never wears out.
Standard Glazing The standard glass in all models is a 1" insulated glass unit with a make up of 1/8" clear tempered glass, 3/4" air, 1/8" clear tempered glass. See the options tab for more glass options.
Standard Finish The standard window frame finish is either clear anodized aluminum or dark bronze (Kawneer #40) anodized aluminum. Easi-Serv offers a broad variety of custom finishes including powder coat; high performance liquid finishes such as Duranar or Durachron, and even special wood grain finishes. See the options tab for more details.
Ready to Install All windows are shipped pre-assembled, fully glazed and ready to install.
|

|
|
Operator Types |
Unit Size |
Service Opening Size |
|||
|
Wu |
Hu |
Du |
Wo |
Ho |
||
|
CSP-1 |
Automatic, Manual, Self Closing |
47 5/8 " |
56 1/2" |
19" |
19 5/8" |
36 1/4" |
Rough Openings:
For installation in storefront framing add 1/4" to Unit Size (1/8" to each side)
For installation in rough wood or other material add 1/2" to Unit Size (1/4" to each side)
Glazing
The standard glass in all models is a 1" insulated glass unit with a make up of 1/8" Clear Tempered Glass, 3/4" air, 1/8" Clear Tempered Glass.
Alternate glazing available at no extra cost includes:
· 1/4" Clear Tempered Glass
· 1/4" Clear Annealed Laminated Glass
Alternate glazing available at addition cost includes:
· Low-E coating
· Colour tinted glass (insulated glass units and single glass)
· Reflective coatings
· Spandrel (insulated glass units)
Finish
The standard finish on all models is either a Clear Class II Anodized Finish or a Dark Bronze Anodized Finish.
Other optional finishes are:
· Black Anodized Finish
· Light Bronze (Champagne) Anodized Finish
All windows can also be finished in custom colours using one of a number of different finish types.
· Powder Coat Finish (by RAL Colour Code). Click here to view the RAL colour code.
· PPG Duracron one-coat spray applied acrylic extrusion coatings. View PPG colours.
· PPG Duranar High Performance two coat baked fluropolymer coatings. View PPG colours.
**We can also match your own color if you can provide with a sample.
We can also finish your window with a stunning simulated wood grain coating. This finish uses a special powder coating process that uses die sublimation technology from Azko Nobel.
Air Curtain and Heater
The window can be provided with a recessed air curtain or heater that is installed inside the hood of the window. See the Air Curtain Tab for more details.
Panel
All windows can be provided with an aluminum insulated panel that is 33" high to match the width of the window. This panel is framed with 4 1/2" x 2" wide aluminum extrusions. The panel is 1" thick. The panel and frame have the same finish as the window.
The T-Series Air Curtain is a combined air curtain and heater that can be installed directly into the hoods of all the Projected (bump-out) style of window. The air curtain is recessed into the hood and has a separate controller for the fan and heater. The grill colour is white.

Specifications of the air curtain are:
|
Models
|
Dimensions |
Supply |
Heat |
Loading |
Max. |
Max. Air |
Weight |
dB(A) |
|
T600ER |
595(l) x 347(d) x 162(h) |
230V~1P&N |
1.5/3.0 |
*13.5 |
4.1 |
300 |
7.5 |
58 |
*This unit is not suitable for surface mounting. Alternative unit is available
*Noise levels are given as a guide only. Variations from this can arise depending on the size of the room the unit is installed in, its acoustic characteristics and the position of the listener.
Heater for CSP, PSB and WMB Projected Windows
The SK-Series Heater can be installed directly into the hoods of all the Projected (bump-out) style of window. The heater is recessed into the hood and has a separate controller for the fan and heater. The grill colour is white.

Specifications of the heater are:
Models
|
Dimensions |
Supply |
Heat |
Loading |
Max. |
Max. Air |
Weight |
|
SK1501W |
419(l) x 292(d) x 111(h) |
120V~1P&N |
1.5/3.0 |
*12.5 |
2 |
100 |
5 |
*This unit is not suitable for surface mounting. Alternative unit is available
British Columbia
+1.604.422.8611
sales@easi-serv.com
Illinois
+1-630-653-1835
salesusa@easi-serv.com